Vista VIP Kit2 VK2-ENCODER Uživatelský manuál Strana 1

VK2-540VRD User Manual

3. Extract each wire through the cable hole, connect BNC cable and communication lines. 4. Unlock torx screws (4x) the dome cover and fix t

Heater Kit Installation 1. Place the heater element is slot “A”. Please ensure that the cables are facing upwards and the heater is pointing toward

Network Connection The VK2-540VRD supports the operation through the network. Therefore, it is necessary to connect a standard RJ-45 cable to

The description of each field for the connection status follows. : Available for connection to the camera : Loading settings information of vide

4. The encoder‟s Live View page appears in your browser. 3.2. Access from the internet Access from the internet Once connected, th

To prevent network eavesdropping when setting the admin password, this can be done via an encrypted HTTPS connection, which requires an HTTPS certifi

start and stop. The Start button connects to the network camera or start playing a video stream. The Pause button pause the video

3.5 Camera Setup (Analog) 3.5.1 Settings Settings can be made using the 5 buttons located on the back of the camera. Structure of menu setup

LENS (Selection) This function is used to adjust the brightness of the screen. 1. When the SETUP menu is displayed on the screen, please positio

[BLC MODE] WHITE BAL The Screen color can be adjusted by using the WHITE BALANCE function. -. AWB: Wide range auto white balance mode.

DAY NIGHT The DAT/NIGHT menu is used to configure the day and night related setting for this camera. This camera can turn the IR(Infrared) f ilter

SPECIAL 1. CAM TITLE -. A CAM TITLE : Camera Title -. B 0123456789ABCD : Character Table EFGHIJK

4. PRIVACY -. AREA SELECT: Select MAK area number. -. AREA DISPLAY: Select MASK ON/OFF. -. LEFT/RIGHT: Adjust the location of the MASK area w

3.5.2 Lens Adjustment (Optical Vari-focal Lens) Field of view: Adjust setting from Telephoto (T) to wide (W) f ield of view. Focus: Adjust lens

3.6 VK2-540VRD Setup This section describes how to configure the VK2-540VRD, and is intended for product Administrators, who have unre

3.6.1 Basic Configuration 3.6.1.1 Users User access control is enabled by default. An administrator can set up other users, by giving these user

3.6.1.2 Network The VK2-540VRD support both IP version 4 and IP version 6. Both versions may be enabled simultaneously, and at least one version must

Notes: 1. DHCP should only be enabled if using dynamic IP address notification, or if your DHCP server can update a DNS server, which then allows yo

resilience tools to the Constrained Baseline Profile. The importance of this profile is fading after the Constrained Baseline Profile has

-. Compression When it is necessary to adjust a smooth transmission status according to network situations, users can increase the c

WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS I

3.6.1.4 Audio The VK2-540VRD can transmit audio to other clients using an external microphone and can play audio received from other clients by atta

of the VK2-540VRD. -. Input Volume If there are problems with the sound input being too low or high, it is possible to adjust the input gain for the

• Current Server Time It displays the current date and time (24h clock). The time can be displayed in 12h clock format in the overlay (see below).

Privacy Masking The privacy masking function allows you to mask parts of the video image to be transmitted. You can set up to eight

You can also modify or delete a motion index. Select an index and then, modify items or delete button. Select “Enable” to activate the privacy masking

3.6.3 Audio Refer to “3.6.1.4 Audio” for more details.

3.6.4 Event 3.6.4.1 Event-In On Boot This is used to trigger the event every time the VK2-540VRD start. Select “Enable” to activ

Alarm In Select “Enable” to activate the alarm event. The VK2-540VRD supports 1 alarm input port. -. Type - Choose the type of alarm you wi

Manual Trigger This option makes use of the manual trigger button provided on the live view page, which are used to start or stop the event type

Motion Motion detection is used to generate an alarm whenever movement occurs (or stops) in the video image. A total of 8 Motion and/or Mask wind

Important Safeguard 1. Read Instructions All the safety and operating instructions should be read before the appliance is operated. 2.

2. Select New Motion (or Mask) Window in the mouse menu. 3. Click and drag mouse to designate a motion area. • Motion Detection Setting The behavior

3.6.4.2 Event-Out SMTP(E-Mail) The VK2-540VRD can be configured to send event and error email messages via SMTP (Simple Mail Trans

network administrator or ISP (Internet Service Provider). To ensure that the login procedure is performed as securely as possible when using SMTP

to the FTP server and establishes a passive FTP connection; whereby the VK2-540VRD actively initiates both the FTP control and data

• HTTP Server Setting -. Name - The name of the HTTP event server. Use a descriptive name. -. URL - The network address to the server and the scri

Audio Alert When the VK2-540VRD detects an event, it can output a predefined audio data to external speaker. Check the box to enable the service.

Audio Recorder To use Audio Recorder tool to make an audio f ile for Audio Alert function, you must install the VIP KIT on the installation CD at fi

Stop: Stop playing audio. Procedures to make an audio file in G.726 format for Audio Alert. 1. Connect the microphone in your PC. 2. Click the Capt

3.6.4.3 Event Map The event map allows you to change the settings and establish a schedule for each event trigger from the VK2-540VRD. You can reg

• General Enter the name for a new event map. • Event In Select an event type in the drop down list. • Event Out -. E-mail: Select email addres

Table of Contents 1. Product Description…………………………………………………………………………………………………6 2. Installation……………………………………………………...…………

• Device Name Configuration Enter the device name. • Location Configuration Enter the location information. You can enter that by four

User access control is enabled by default, when the administrator sets the root password on f irst access. New users are authorized with

HTTPS For greater security, the VK2-540VRD can be configured to use HTTPS (Hypertext Transfer Protocol over SSL (Secure Socket Layer)).

IP Filtering Checking the Enable IP address filtering box enables the IP address filtering function. Up to 256 IP address entries may be

3.6.5.3 Date & Time • Current Server Time It displays the current date and time (24h clock). The time can be displayed in 12h clock for

3.6.5.4 Network Setting in regard to network can be executed. Settings for IP, DNS, Host Name, Port, and ARP/Ping can be established,

Basic • IP Address Configuration: -. Obtain IP address via DHCP - Dynamic Host Configuration Protocol (DHCP) is a protocol that lets network a

DDNS • Internet DDNS(Dynamic Domain Name Service) When using the high-speed Internet with the telephone or cable network, users can

RTP Have a setting for sending and receiving an audio or video on a real-time basis. These settings are the IP address, port

UPnP The VK2-540VRD includes support for UPnP™. UPnP™ is enabled by default, and the VK2-540VRD then is automatically detected by operating sys

1. Product Description This manual applies to the VIP Kit2 Camera – VK2-540VRD. The VK2-540VRD vandal resistant dome is a Hybrid analogue and IP ca

QoS Quality of Service (QoS) provides the means to guarantee a certain level of a specified resource to selected traffic on a net

-. Management DSCP: • Auto Traffic Control Set a limitation on user network resources by designating the maximum bandwidth. -. Maximum bandwidth -

• NAT traversal Settings -. Enable - when enabled, the VK2-540VRD attempt to configure port mapping in a NAT router on your network,

3.6.5.6. Maintenance • Maintenance Server -. Restart - The unit is restarted without changing any of the settings. Use this method if the

• Restore Import and apply a setting value saved to a user PC. Note: Backup and Restore can only be used on the same unit running the same firmware.

3.8 Camera Menu Control You can control camera menu in the live screen. Press the button on the left top in the live screen to activate t

3.9 Help The Help information window will be provided as a popup window so that users can open and read it without a need for log-in. It will offer a

3.10 Resetting to the factory default settings To reset the VK2-540VRD to the original factory settings, go to the Setup > System

4. Appendix 4.1 Troubleshooting Troubleshooting if problems occur, verify the installation of the VK2-540VRD with the instructions in th

4.2 Preventive Maintenance Preventive maintenance allows detection and correction of minor that faults before they become serious and cau

Key Features • Brilliant video quality The VK2-540VRD offers the highly efficient H.264 video compression, which drastically reduces bandw

4.3 Product Specification Main Item NTSC PAL Image sensor 1/3” SONY Super HAD CCD Total pixels 811(H)x508(V) 795(H)x596(V) Scanning system 2:1 inte

N E T W O R K API Programming Interface API Supported, Open Platform Compatible: Milestone, ONVIF Alarm Triggers Motion Detection, External Input

Norbain SD Ltd 210 Wharfedale Road Winnersh Triangle Wokingham Berkshire England RG41 5TP Subject to change

2. Installation For the operation of the VK2-540VRD, it is necessary to connect a network cable for data transmission, power connection from

NO Wire Color Description 1 Red: AC24V/DC12V White: AC24V/GND Main Power, 2pin terminal, DC12V/AC24V, max. 6.5W 2 Green: AC24V/DC12V Black: AC24V/GND