Vista Ademco -10SE Průvodce řešením problémů stáhnout pdf (Strana 32)

This section provides instructions for installing 5800 series wireless receivers and

transmitters and includesa procedurefor programming wirelesszones.

General Information

In addition to its basic wired zones, the control supports up to 24 wireless

zones using an appropriate 5881 (5882 in Canada) type RF receiver. The

actual number of zones supported also depends on whether you are using a

wired zoneexpandermodule.

For exampk:

If you are using only four of the wired expansion loops, a

5881H (5882H in Canada) RF Receivercould add 20 RF zonesto the system,

using any zone numbers in the range of 18-83, for a combined total of 24

wired and wirelessexpansionzones.

However, if you are not using wired zone expansion, the 58811V5882H RF

receivercould add 24 wireless zonesto the system, using any zone numbers

in the range of 10-83.

The receivercan detectsignals from wirelesstransmitters within a nominal

range of 200 feet.

Receiver Supervision

The receiveris supervised, and a trouble report will be generated. CHECK

and zone09 will alsobe displayed.

a) If communicationbetweenthe panel and the receiveris interrupted.

b) If no valid RF signals from at least one

supervised wirelesstransmitter

are receivedwithin 12 hours.

House Identifkation

If you are using a 5827 or 5827BD Wireless Keypad with the system, you

must program a House ID Code (O1-31) in field *24 to establish proper

communication,and the keypad must be setto the sameID.

DIP switch setting information for a 5827 is given later in this section. The

5827BD is keypad programmable.

-32-

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 119 120

Žádné komentáře

Vista Ademco -10SE Průvodce řešením problémů Strana 32